●仿古砖雕翻模硅胶模具硅胶胶浆产品介绍
Product introduction of silicone rubber mold for antique brick carving
仿古砖雕翻模硅胶模具硅胶胶浆HY-530是双组份缩合型有机硅橡胶，A组份为可流动性的液体，B组份是固化剂（硫化剂或硬化剂），二者按比例混合后能快速成型，可室温固化。
The silica gel paste hy-530 is a two-component condensed silicone rubber. Component A is a fluid, and component B is a curing agent (curing agent or hardener). The two components can be rapidly molded and cured at room temperature after mixing in proportion.
●仿古砖雕翻模硅胶模具硅胶胶浆产品特点
Features of silicone glue products for silicone mold of antique brick carving
1、粘度低、流动性好、好操作。
1. Good fluidity and low operation.
2、缩水率小，不变形,小批量模具复制，模型设计等。
2. Small shrinkage, no deformation, small batch mold replication, model design, etc.
●仿古砖雕翻模硅胶模具硅胶胶浆技术参数
Technical parameters of silicone mortar for silicone mold of antique brick carving
型号
model
530#
530#
颜色
colour
白色、
White
粘度 (CS)
Viscosity (CS)
9000+2000/-3000
9000+2000/-3000
比重( g/cm 3 )
Specific gravity (g / cm3)
1.12
one point one two
硬度 (A°)
Hardness (a °)
30±2
30±2
抗拉伸强度( mpa)
Tensile strength (MPA)
2.2+2/-0.5
2.2+2/-0.5
抗撕裂强度 (kgf /cm2 )
Tear strength (kgf / cm2)
3+3/-2
3+3/-2
伸长率(%)
Elongation (%)
≥120
≥120
线收缩率(%)
Linear shrinkage rate (%)
≤0.3
≤0.3
固化剂添加比例(%)
Proportion of curing agent added
3-5 %
3-5 %
操作时间( mins )
Operating time (mins)
30
Thirty
固化时间( hours )
Curing time (hours)
4-8
4-8
*粘度、操作时间、固化后硬度可随客户需求调整
*The viscosity, operation time and hardness after curing can be adjusted according to customer requirements
●用 途
Application
手板硅胶用于制作手板模型，PVC塑胶模，水泥制品模具，低熔点合金模，合金玩具工艺，塑胶玩具，电子，工艺品，文具行业，大型雕像，文物的复制，（鞋模）鞋底模具制造，移印定位，电子设备抗震等产品的模型开发设计。
Hand board silica gel is used for making hand model, PVC plastic mold, cement product mold, low melting point alloy mold, alloy toy technology, plastic toys, electronics, handicrafts, stationery industry, large statues, cultural relics replication, (shoe mold), sole mold manufacturing, pad printing positioning, electronic equipment anti-seismic product model development and design.